Nowadays, the use of antiseptic wood in home decoration has become more and more frequent. For example, for wooden floors, the indicator of their hardware is that they must be waterproof, moisture-proof and anti-corrosion, so that the wooden floor will be durable in the process of use. So now there is also a kind of antiseptic wood on the market, and the floor made of this wood can do a good job of anti-corrosion. But I believe that many friends do not have a special understanding of the installation process of anti-corrosion wood, so in the following content, Residential Online will give you a specific explanation.
1. Before the construction of anti-corrosion wood floor, the material loss must be removed. The construction site must be cleaned up first. Before the construction, the location and laying direction must be confirmed. If the material is too wet, it needs to be cool and dry before installation. After the construction and installation of wood with large water content, large deformation and cracking will occur. Generally, the wood loss during installation is about 8% to 12%, and the abnormal shape is calculated separately.
2. Laying of floor keel Before laying of anti-corrosion wood floor, the ground must be leveled with anti-corrosion keel or galvanized square steel keel with a general spacing of 300-400 mm. Use a level gauge to check whether the keel is flat. For the structure linked into a frame or well shaped frame, if there is a waterproof layer, the keel can be laid on the ground (floor keel support device) or the keel can be laid with mortar bricks.
3. During the production and installation of anti-corrosion wood, a gap of 3 to 5 mm should be left between the anti-corrosion wood floors to avoid water accumulation in rainy days and the expansion of anti-corrosion wood. Galvanized connectors or stainless steel connectors and hardware products should be used for floor connection to prevent corrosion.
4. How to paint the anticorrosive wood installation Before painting the anticorrosive wood floor, it is necessary to keep the surface of the floor material dry, and then polish it with 120 to 240 sandpaper. It is recommended that the back of the material be painted so as to better protect the service life of the wood. Generally, anticorrosive wood materials need to be painted for 2-3 times.
The above is a detailed introduction of Jinan antiseptic wood, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.ipvcserver5.com